不銹鋼裝飾管1.4313是馬氏體級，耐耐高溫高朝，熱運作后耐力性好。X3CrNiMo13-4鋼的物理性能方面是因為耐腐化材料中鉬和鎳的高含鋅量。這樣鎂合金填加劑被限了增多級碳含鋅量的所需——給定滲透壓相當于是于奧氏體不銹鋼裝飾管。即便是鎳含鋅量不夠，但鎳含鋅量約為4%，特殊提升了鋼對多種多樣耐高溫環鏡的預防力——第二次物理性能方面。X3CrNiMo13-4鋼粉絲可生產獨角獸高達300℃在溫下運作的工件加工圖和工件加工圖，或者外露在多種多樣耐高溫環鏡中的工件加工圖，還要保持充足的漆層環境括抗氯化物性)。QT650.QT780和QT900環境下，熱運作后最應交工槽鋼。半的成品適用油品生產.礦業.在冶金工業和新能源制造業，增壓機外露在高溫文爾雅低溫制冷的效果下.泵.減小機元器件。鋼身體不可以對接焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50銷售EN1.4313馬氏體不繡鋼存在熱處理性狀（+A）情況、熱處理和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，需用哪是一個千萬要跟渠道說清晰哦。